
Selective Pallet Rack
The most universal pallet racking system for direct access to every pallet position.
Avon operators usually reach out at the same moment: the building filled up faster than planned, and the overflow is now living in the staging area. Once staging becomes storage, receiving slows down and everything downstream of it gets harder. Indianapolis Pallet Rack fixes that by putting the overflow back into rack. We measure what your building can hold, draw a CAD layout with the pallet position count, and give you an itemized quote — then our crews install it around your schedule.
Avon buildings along US 36 and the Ronald Reagan corridor often have more usable height than owners expect. That is usually the fastest capacity win.
Hendricks County has absorbed a lot of distribution growth, and Avon buildings along the US 36 corridor sit close enough to the airport cluster to serve the same customers without the same rent.
The catch is that many of these buildings were racked once, years ago, at a lower beam count than the clear height allows. Adding a level across an existing system is often cheaper per pallet position than any other option on the table, and it is the first thing we check.
When more height is not the answer, density is. Push back and drive-in convert aisle space into storage for the SKUs that sit still. We are close enough to Avon that adding those rows later stays simple.
Our crews work the US 36 and Ronald Reagan Parkway corridors in Hendricks County, including:

It starts with a phone call and four numbers: your pallet dimensions, your average and maximum pallet weight, the forklift you drive, and the clear height from the floor to the lowest overhead obstruction.
From there we produce a CAD layout of your building showing rows, aisle widths, beam elevations, and a pallet position count. You see how many pallets the space holds before anything is ordered.
The quote that follows is itemized — frames, beams, wire decking, pallet supports, row spacers, and protection listed separately, so you can see what each part of the system costs and adjust the scope if you want to.
Once approved, standard components usually ship within 48 hours and our installation crews handle the rest. The system goes in anchored, plumbed, and capacity-tagged, phased around your receiving and shipping schedule so the dock keeps moving.
What you end up with is a rack layout sized to your operation, a documented load capacity for every beam level, and one local number to call when you want to add a row or replace a component.
Call and you will reach the people who lay the systems out, not a call center.
(317) 659-6552These three come up most often in Avon buildings, but we stock and install the full range.

The most universal pallet racking system for direct access to every pallet position.

High-density storage where pallets are loaded from a single aisle.

High-density storage for large quantities of similar products.

First-in, first-out (FIFO) system with gravity-fed lanes.

Open-front design for long, bulky, or irregularly shaped items.

Hand-picking system with gravity-fed wheel conveyors.
Racking our crews have installed for warehouses in and around Avon and the wider Indianapolis metro.










Send us the basics and we will come back with a CAD layout, a pallet position count, and an itemized quote.
Before designing your pallet rack system, there are several key factors to consider. Our warehouse design specialists will help you answer these questions during your free consultation.
Our crews cover the metro, so a project just outside Avon runs on the same delivery times and the same installation teams.
Call (317) 659-6552 or request a free quote and warehouse design consultation.