
Selective Pallet Rack
The most universal pallet racking system for direct access to every pallet position.
Zionsville's industrial space sits along the I-65 corridor, close enough to Indianapolis to serve the metro and far enough out to still have room. Most of the operations we rack here are fulfillment and distribution businesses that grew past their original layout and now need more pallet positions without more square footage. Indianapolis Pallet Rack draws the building in CAD, counts the positions, prices the components line by line, and installs the system so your pick paths stay short and your bulk storage stays out of the way.
Fulfillment operations usually want a two-zone layout: case picking up front, pallet storage behind it. We lay both out together.
Zionsville sits in Boone County right on I-65, which makes it a practical base for operations shipping across the Midwest. The buildings tend to be newer and reasonably tall.
For fulfillment work, height alone is not the answer. What usually matters more is separating the pick face from bulk storage so pickers are not walking the length of the building. Carton flow at the pick face with pallet storage behind it solves that in a single layout.
We handle the whole thing from one order — frames, beams, decking, flow lanes, and protection — and install with our own crews. Being fifteen minutes down I-65 keeps replacement parts and additional bays quick to source.
Our crews work the I-65 corridor through southern Boone County, including:

It starts with a phone call and four numbers: your pallet dimensions, your average and maximum pallet weight, the forklift you drive, and the clear height from the floor to the lowest overhead obstruction.
From there we produce a CAD layout of your building showing rows, aisle widths, beam elevations, and a pallet position count. You see how many pallets the space holds before anything is ordered.
The quote that follows is itemized — frames, beams, wire decking, pallet supports, row spacers, and protection listed separately, so you can see what each part of the system costs and adjust the scope if you want to.
Once approved, standard components usually ship within 48 hours and our installation crews handle the rest. The system goes in anchored, plumbed, and capacity-tagged, phased around your receiving and shipping schedule so the dock keeps moving.
What you end up with is a rack layout sized to your operation, a documented load capacity for every beam level, and one local number to call when you want to add a row or replace a component.
Call and you will reach the people who lay the systems out, not a call center.
(317) 659-6552These three come up most often in Zionsville buildings, but we stock and install the full range.

The most universal pallet racking system for direct access to every pallet position.

First-in, first-out (FIFO) system with gravity-fed lanes.

Hand-picking system with gravity-fed wheel conveyors.

High-density storage where pallets are loaded from a single aisle.

High-density storage for large quantities of similar products.

Open-front design for long, bulky, or irregularly shaped items.
Racking our crews have installed for warehouses in and around Zionsville and the wider Indianapolis metro.










Send us the basics and we will come back with a CAD layout, a pallet position count, and an itemized quote.
Before designing your pallet rack system, there are several key factors to consider. Our warehouse design specialists will help you answer these questions during your free consultation.
Our crews cover the metro, so a project just outside Zionsville runs on the same delivery times and the same installation teams.
Call (317) 659-6552 or request a free quote and warehouse design consultation.