Can I add cantilever rack to my existing pallet rack?

Usually, if the connections and rated configuration match. "Teardrop" is not universal across manufacturers: send photos of the upright face, beam connector and any label so we can match compatible new components. A conversion also needs the frame depth, component capacities and operating clearances checked for the selected system.

Can you supply and install cantilever rack for my Franklin warehouse?

Yes. We handle design, supply and installation with experienced installation crews we schedule and manage. The system is anchored to the floor, aligned to the approved layout and handed over with its load capacities documented.

How much weight can cantilever rack hold?

There is no single capacity that applies to every configuration. Beam capacity is per pair, per level; frame capacity depends on height and beam spacing. We size beams and frames from your heaviest pallet and put the capacities on load plaques. Cantilever arm, column and base ratings are checked against your heaviest bundle and support spacing.

When should I choose cantilever rack?

Cantilever suits long loads such as lumber, pipe and steel that need an open loading face and support along their length. Selective teardrop is the default for mixed SKUs; pushback stores two to six deep LIFO by SKU; pallet flow supports FIFO or dated stock; drive-in suits bulk quantities of few SKUs; cantilever supports long loads; carton flow serves case picking. We compare access, rotation and occupied positions before recommending a system.

How much does cantilever rack in Franklin cost?

Price depends on pallet positions, rack height, beam capacity, decking, freight and installation. Send your pallet size, heaviest load per level, clear height and building size for a free CAD layout and itemized quote.

Cantilever Rack system inside a Indiana warehouse

Franklin, Indiana

Cantilever Rack in Franklin, IN

Long manufacturing stock in a Franklin building can need a different support pattern after the product line changes from short components to longer bundles. Production changes can leave storage elevations and working zones suited to an old product mix. That makes review arm capacity and support spacing before simply adding another arm level a practical design question for this building, not a reason to order the largest system in a catalog. Cantilever Rack in Franklin, IN starts with understanding that constraint. Cantilever warehouse racking supports long materials on arms extending from columns, with no front beam across the loading face. Bundle length, stiffness, weight, and handling method decide the support pattern. A long load needs sufficient support along its length as well as room to be picked and turned.

Send your floor plan and load information or call (317) 659-6552; we will work through the fit before quoting.

(317) 659-6552

Why Franklin Warehouses Work With Us

Franklin's manufacturing and distribution activity around I-65, US 31, and the industrial park needs storage that follows current production rather than the process that originally occupied the building. A changed load height or a new handling truck can alter both the capacity and the aisle plan. We use your existing component information when a reconfiguration is part of the project, checking what can be retained before adding material. Johnson County access makes regional transport practical, but production replenishment and finished-goods dispatch still need separate consideration in the drawing. The quote should make reuse and new components distinguishable.

For this cantilever rack project, the specific task is to review arm capacity and support spacing before simply adding another arm level. We calculate arm capacity and support spacing from the actual material, not a universal spacing rule. Single-sided and double-sided runs have different access and base requirements. The drawing also shows how a loaded truck approaches the arms, because storage that fits on paper can still be awkward to retrieve when a long bundle enters the aisle.

As a division of Warehouse Equipment & Supplies Co., we bring storage-layout, quoting, and installation experience dating to 1997. Your consultation uses the measurements and photos you provide. You get the proposed layout and itemized scope before committing, with one contact to coordinate questions about delivery, installation, and later changes.

Free warehouse consultation

CAD layout with position counts

Delivery and professional installation

Cantilever warehouse racking holding steel tubing

Cantilever rack storing lumber and wood products

Operations We Rack Around Here

Nearby areas we work in regularly include Franklin industrial park, I-65 exit 90 corridor, US 31 corridor, Amity Road industrial.

Manufacturing

Automotive supply

Food processing

Distribution

How Cantilever Rack Works

Arms with nothing in front of them, built for lumber, pipe, and anything a pallet can't hold.

Columns and anchored bases

Upright columns sit on bases anchored to the floor. Base depth is set by load and arm length so the run stays stable even under an off-center pick.

Arms at adjustable heights

Arms bolt or pin into the column at set increments and move as your product mix changes. Straight arms suit boxed goods; inclined arms with a lip hold round or loose stock in place.

Column spacing against sag

Spacing between columns is set so bundles don't sag between arms. A common starting rule places arms about half the load length apart, with the ends overhanging evenly.

Single-sided or double-sided

Single-sided runs go against a wall. Double-sided runs stand in open floor and load from both faces, doubling capacity per base without doubling the footprint.

What a Cantilever Rack Project Includes

The Franklin project starts with the operating information you provide: bundle dimensions, material stiffness, weight per supported load, arm elevations, and loaded turning space. We also review the floor plan, fixed obstructions, usable height, and the working routes around the I-65 exit 90 and US 31 industrial corridors. Your automotive supply, food processing, and manufacturing dispatch schedule helps identify which zones need immediate access and which can be set aside for installation.

Cantilever specification starts and ends with the load. We collect bundle dimensions, weight per bundle, and how material is handled - forklift forks, a side loader, or by hand off a cart - because that determines arm length, arm capacity, and how much clearance each level needs.

From there we set column height and spacing, choose straight or inclined arms, and decide whether lips are needed to keep round stock from rolling. Single-sided runs get positioned along a wall; double-sided runs get aisle dimensions matched to whatever's moving material in and out.

The quote itemizes columns, bases, arms, bracing, and anchors, with a CAD drawing showing the run, arm levels, and rated capacities per arm. Installation crews anchor bases to the floor, align columns, brace the run, and set arm elevations to the drawing.

The result is arms you can reposition as inventory changes, capacity ratings for every level, and the floor space that long material used to occupy.

Support spacing must suit material stiffness as well as weight. Short bundles may need a different support pattern from long stock in the same run, and loosely packaged materials need their own review. We show the loaded approach and turning space alongside the arm arrangement, then confirm that later level changes remain within the column and base ratings.

Lumber, plywood, and sheet goods

Pipe, tube, conduit, and bar stock

Steel service center inventory

Furniture, doors, and windows

Long or awkward loads currently sitting on the floor

Call (317) 659-6552

Recent Installations

Racking projects completed for warehouses across Central Indiana.

View More Projects

Get a Cantilever Rack Quote for Your Franklin Warehouse

Send the basics and we will follow up with a layout and pricing. Prefer to talk it through? Call (317) 659-6552.

Indianapolis Pallet Rack

9105 E 56th St.

Ste J #2291

Indianapolis, IN 46216

(317) 659-6552

Monday - Friday: 8:00 AM - 6:00 PM

Name *

Company *

Email *

Phone *

Where are you located? *

Approximate warehouse size *

Expected timeframe *

Additional Information

I consent to receive SMS and email communications from Indianapolis Pallet Rack regarding my quote request. Message and data rates may apply. Reply STOP to opt out.

We respect your privacy. Your information will never be shared.