What aisle width do I need?

Aisle width is set by the lift truck: counterbalance trucks generally need about 12–13 feet, reach trucks about 8–10 feet, and very-narrow-aisle equipment about 5–6 feet. Confirm the actual truck specification and loaded turning requirement before fixing the layout; aisle width is a major driver of storage density.

Can you supply and install drive in rack for my Mooresville warehouse?

Yes. We handle design, supply and installation with experienced installation crews we schedule and manage. The system is anchored to the floor, aligned to the approved layout and handed over with its load capacities documented.

How much weight can drive in rack hold?

There is no single capacity that applies to every configuration. Beam capacity is per pair, per level; frame capacity depends on height and beam spacing. We size beams and frames from your heaviest pallet and put the capacities on load plaques. Lane components are also selected for the actual pallet weight and configuration.

How much does drive in rack in Mooresville cost?

Price depends on pallet positions, rack height, beam capacity, decking, freight and installation. Send your pallet size, heaviest load per level, clear height and building size for a free CAD layout and itemized quote.

When should I choose drive in rack?

Drive-in suits bulk quantities of a few SKUs when direct access to each pallet is not required. Selective teardrop is the default for mixed SKUs; pushback stores two to six deep LIFO by SKU; pallet flow supports FIFO or dated stock; drive-in suits bulk quantities of few SKUs; cantilever supports long loads; carton flow serves case picking. We compare access, rotation and occupied positions before recommending a system.

Drive-In Rack system inside a Indiana warehouse

Mooresville, Indiana

Drive-In Rack in Mooresville, IN

Bulk building-product pallets in a Mooresville warehouse can justify deep storage, but the handling truck may have been selected for open-floor supply work rather than rack lanes. Shop-and-warehouse buildings vary in age and height, with storage and dispatch often sharing compact working space. That makes confirm truck width, mast clearance, and loaded entry path before choosing drive-in a practical design question for this building, not a reason to order the largest system in a catalog. Drive-In Rack in Mooresville, IN starts with understanding that constraint. Drive-in pallet rack stores repeated loads on support rails inside lanes entered by the forklift. It reduces access-aisle space for concentrated inventory, at the cost of individual pallet access. One-ended drive-in normally runs LIFO; a drive-through arrangement needs access at both ends and an agreed loading sequence.

Send your floor plan and load information or call (317) 659-6552; we will work through the fit before quoting.

(317) 659-6552

Why Mooresville Warehouses Work With Us

Mooresville's SR 67 corridor and nearby Camby business space include both supply warehouses and shop operations. That mix means a rack plan should distinguish pallet reserve, long materials, and the floor needed to assemble outgoing orders. Connections toward I-70 help with freight access, but the storage decision starts with the building's actual clear height and handling equipment. We do not assume a newer distribution-style footprint when a tenant occupies a smaller mixed-use industrial building. The drawing shows where materials are supported, how they are retrieved, and which working zones need to stay available during installation.

For this drive-in rack project, the specific task is to confirm truck width, mast clearance, and loaded entry path before choosing drive-in. We put truck clearance beside lane occupancy in the comparison. Mast dimensions, load backrest, pallet width, and turning requirements matter as much as the position count. A dense block that suits bulk reserve can be a poor choice for frequent mixed orders, so the directly accessed working stock should remain outside that block.

As a division of Warehouse Equipment & Supplies Co., we bring storage-layout, quoting, and installation experience dating to 1997. Your consultation uses the measurements and photos you provide. You get the proposed layout and itemized scope before committing, with one contact to coordinate questions about delivery, installation, and later changes.

Free warehouse consultation

CAD layout with position counts

Delivery and professional installation

Drive-in pallet rack lanes fitted with continuous rails

Drive-in warehouse racking loaded with bulk pallets

Operations We Rack Around Here

Nearby areas we work in regularly include SR 67 corridor, Camby industrial, Mooresville business park, Bridgeport Road area.

Distribution

Building products

Light manufacturing

Contractor supply

How Drive-In Rack Works

Forklifts enter storage lanes; fewer access aisles leave more floor for bulk pallets.

Continuous rails, not beams

Pallets rest on rails carried by upright frames rather than individual beam levels, so a lane accepts pallet after pallet at the same elevation.

The truck enters the lane

The driver travels inside the bay to place or retrieve each load. Lane width, rail height, and mast clearance get dimensioned to that specific truck, not a generic one.

One open end or two

One open end gives LIFO and high storage density. Two open ends give FIFO with slightly fewer positions, since each lane now needs clearance from both sides.

Guarding built into the design

Guide rails, column guards, and rail-end protection are part of the spec from the start, to reduce contact between lift trucks and the rack.

What a Drive-In Rack Project Includes

The Mooresville project starts with the operating information you provide: loaded forklift dimensions, pallet support, lane depth, SKU quantities, and the retrieval sequence. We also review the floor plan, fixed obstructions, usable height, and the working routes around SR 67 and the Camby business area. Your building-product supply, contractor orders, and light-manufacturing dispatch schedule helps identify which zones need immediate access and which can be set aside for installation.

The design starts with the forklift, not the rack. Mast height, overall width, load backrest, and turning clearance decide lane dimensions, so truck specifications get collected before anything is drawn.

Next we look at SKU depth. Drive-in rewards deep lanes of a single product and punishes variety - if a lane never fills, you've built an expensive way to store less than you could have with selective. Where the inventory profile is mixed, we'll usually recommend a hybrid: selective at the pick face, drive-in behind it for reserve.

The quote itemizes frames, rails, rail supports, guide rails, and column protection, with a CAD drawing showing lane depth, rail elevations, and total positions. Installation crews anchor the system to the floor and align every rail run, then verify a loaded pallet travels the full lane before handing the system over.

You receive the approved layout, documented load capacities and one contact for later expansion or a change in inventory profile.

Before committing to the block, confirm how many loads of each SKU will occupy a lane during normal weeks and seasonal peaks. We also check the loaded truck envelope against rail supports and entry clearances. The working procedure must identify the retrieval sequence; two-ended access makes FIFO possible but does not enforce stock rotation automatically.

High volume of a small number of SKUs

Seasonal or buffer inventory held in bulk

Cold storage and freezer rooms where cube matters most

Product too fragile to floor-stack more than two high

Buildings where floor space, not height, is the binding constraint

Call (317) 659-6552

Recent Installations

Racking projects completed for warehouses across Central Indiana.

View More Projects

Get a Drive-In Rack Quote for Your Mooresville Warehouse

Send the basics and we will follow up with a layout and pricing. Prefer to talk it through? Call (317) 659-6552.

Indianapolis Pallet Rack

9105 E 56th St.

Ste J #2291

Indianapolis, IN 46216

(317) 659-6552

Monday - Friday: 8:00 AM - 6:00 PM

Name *

Company *

Email *

Phone *

Where are you located? *

Approximate warehouse size *

Expected timeframe *

Additional Information

I consent to receive SMS and email communications from Indianapolis Pallet Rack regarding my quote request. Message and data rates may apply. Reply STOP to opt out.

We respect your privacy. Your information will never be shared.